Nvidia ForceWare WHQL Certified nForce Drivers v3.13

[Reverend]

Nvidia has released new ForceWare WHQL certified drivers v3.13 for nForce,nForce2,and nForce3

Release Notes

WHQL certified kit for nForce, nForce2, and nForce3
First release of NVIDIA IDE driver for Windows XP and Windows 2000
General compatibility fixes
Audio Improvements:
Realtek ALC655 codec support added
Fix for BSOD on loading DLS files
Reduced susceptibility to audio glitches under heavy system load; additional fixes for 6 channel GetPosition glitches
ASIO support for recording at sample rates other than 48kHz; lower and more predictable latency
Fixes for NOLF. The 3D minimum and maximum distance and the roll off factor were not being taken into account for air absorption. Also modified reverb gain so that the max distance was taken into account
Fix for EAX reverbs; initialized EAX reverbs to off when querying for the EAX listener interface; updated EAX property handlers to ignore invalid parameters instead of range limiting -- this matches Creative EAX behavior

:arrow: Download: ForceWare WHQL certified drivers v3.13 (http://www.nvidia.com/object/nforce_udp_winxp_3.13) (2000/XP)

Guru3D (http://www.guru3d.com/newsitem.php?id=706)

[phishhead]

just a warning guys I wouldnt recommend installing these drivers...after installing these I burnt about 10 coasters and couldnt figure out what the hell was going on.
I reinstalled alcohol 120 and nero twice still would not burn it would fill the buffer then lock up the pc hard. after quite a bit of reinstalling software aspi drivers I finally went back to the 2.45 and volia everything back to normal. So if you have the A7n8x use it at your own risk.

[zipp51]

Thanks for the warning Phishhead,I was just about to download them to try.:biggrin:

[zErO]

Originally posted by phishhead
just a warning guys I wouldnt recommend installing these drivers...after installing these I burnt about 10 coasters and couldnt figure out what the hell was going on.
I reinstalled alcohol 120 and nero twice still would not burn it would fill the buffer then lock up the pc hard. after quite a bit of reinstalling software aspi drivers I finally went back to the 2.45 and volia everything back to normal. So if you have the A7n8x use it at your own risk.

Hmmm thats very interesting phish, cause I cant seem to burn anything either and I have the 3.13 drivers installed:( . Ive reinstalled nero, clonecd numerous times and tried everything else but the NForce drivers. I kept on getting some wierd power calibration error:msnmad:

[FastGame]

The only problem that I know of with the 3.13 drivers is the Nvidia SW IDE driver. If it ask you to install the SW IDE driver click no and the ITB (in the box) IDE drivers will install instead. The ITB drivers are the same as the M$ IDE drivers that come with XP...they're just updated to recognize ATA 133.

I'm using the Nvidia SW drivers and they work fine, I had to put the Nero WNASPI .dll in my Exact Audio Copy folder in order for EAC to work.

If your having problems with the Nvidia SW IDE drivers then roll back to the M$ IDE drivers.