-
July 11th, 2004, 03:05 AM
#1
impossible! flushing arp cache
so i've searched exhaustively on many forums/knowledge bases and stuff but cant find the answer i want (except perhaps at expert exchange but it says "sign up to see solution" and it costs 10 bucks a monthly pop =[). i've seen other people with the same problem and with no answers as well. i messed with some windows services by using "services.msc" in run and switching some from automatic to manual. then my compy's internet pinged at 200 which was the suck. so i switched em back and it's down to about 100 but should be around 30. also, the problem i had since the service manualling is that in my network connections, i hit "repair" and it comes up with an error saying "blah blah operation failed: flushing arp cache. contact your isp guy". using arp -d and arp -a or netsh interface ip delete arpcache in command doenst solve it. one guy said he switched his services and it solved for him and also one guy told me IT WAS a service i siwthced but i switched and started em all back but still ping very high. anyone else has other advice and i would appreciate it GREATLY. seriously, i'm gettin grey hairs already and i'm 15!
-chung, thanks you
-
July 11th, 2004, 07:43 AM
#2
Head Honcho
Administrator
Try disabling "Routing and Remote Access" in services and reboot.
Also run Network Diagnostics to see if it shows a problem. Go to Run and type in netsh diag gui and hit enter. After a few seconds the Help & Support window will open,then click "Scan your system". Let us know if any errors are listed.
-
July 14th, 2004, 04:46 AM
#3
wow u solved it. thx man!
-
August 7th, 2004, 21:33 PM
#4
Junior Member
I have the same problem and nothing iv'e tried has worked yet. Ok, so here's what happened. I've been using a router and my sister wanted to change to a hub since the router blocks file tranfers through messenger. When we switched to the hub my internet connection got really slow. So we switched back to our old router and my internet was still messed up. My internet is still slow and I keep getting disconnected from MSN messenger. My download speed always fluctuates from 0 - 60 kbps. When i try to repair the local area connection status it says error in flushing the arp cache. i tried using arp -a, arp -d in the command promp and still nothing happened. I tried disabling the "routing and remote access" from services and the reapair went fine but my internet connection still gets cut off. I tried using netsh diag gui and here's the results:
Internet Service
Default Outlook Express Mail Not Configured
Default Outlook Express News Not Configured
Internet Explorer Web Proxy Not Configured
Computer Information
Computer System YOU-U35A06OIXC9
Operating System Microsoft Windows XP Professional
Version 5.1.2600
Modems and Network Adapters
Modems Communications cable between two computers
Network Adapters [00000008] NVIDIA nForce MCP Networking Adapter FAILED
Network Clients
Any sort of help and advice would be greatly appreciated.
-
August 8th, 2004, 01:59 AM
#5
Junior Member
I keep getting invalid IPs when I type arp -g. I use arp -d to delete them but it just keeps making invalid IPs. What is wrong?
-
August 11th, 2004, 21:47 PM
#6
Bronze Member
your normally suppose to start a new thread, but try repair the connection, if u haven't already
-
August 12th, 2004, 04:08 AM
#7
Succeded in braking Windo
TZ Veteran
Manoy, I don't understand why you took off the router. IF you put a hub, did you use a firewall?
Well, file transfer thru NAT router does work. tomshardware has a guide how to enable. Now, I don't have Upnp enabled. nor I did the routing for those ports and I can still send files to my work (NAT to NAT) so I don't see a problem with that.
If you see slow connections make sure you don't have any computer in the DMZ, that could be compromised (hacked)
Install temporaly a firewall in all of your computers to see what is going on with your network. You might have a trojan or worm. At least like that you can pint point the source. If that still doesn't work, reset the router to factory defaults.
I am tending right now to believe that your security was compromised when you went back to the hub, either from a hacking or virus-type.
What router do you have?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks