-
March 20th, 2005, 01:18 AM
#1
"cheesy" low budget case mod cooling
I usually stick an 80mm fan, in the empty bays with double sided tape, blowing in - with a backside fan blowing out. It's good for a couple less degrees as it blows right on my cpu heatsink.
Well, I had a junk power supply so I cut off the backside as it fits perfectly into the bays. Now I have a mount for fan and a switch for it or whatever. I have to put some screws in though to cover the holes.
Last edited by lynchknot; March 21st, 2005 at 01:26 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks