Tape Drive DAT 72

[taqi]

Hi All

I have Install Drivers for Tape Drive DAT 72 on windows 2003 and the drivers has install successfully but I cant able to view the tape icon in mycomputer windows

Thanks in Advance
Taqi

[rik]

Welcome to Techzonez. Did you have a tape in the drive when trying to view the icon in My Computer?

[taqi]

Yes tape is inside the drive when i am tryind to c the icon in my computer

[Big Booger]

IS this USB or SCSI?

Make sure the device is connected correctly:
USB
http://h20000.www2.hp.com/bizsupport...ctID=c00553255

Also if it has the configuration switch, check to see if the switches are set properly.

Try a new tape, and if anything, try the device in another computer to see if there is some conflict with the machine itself and your Tape drive.

[gargoyle149]

Some dat drives do not show in My Computer, they can usually be viewed by opening the Windows XP backup utility, or if you have veritas and you can see it in the device manager, use the add device in veritas, this will install the veritas drivers and you can view the tape drive from within veritas.

Hope this helps.

[cash_site]

also, you need to check the computer management has assigned removable device in the pool. then i dont think it is viewed/used via my computer... more backup programs like NTbackup, veritas etc etc...