Results 1 to 3 of 3

Thread: Dell 964 AIO Printer and Windows 7 [FIXED]

  1. #1
    Junior Member waxace's Avatar
    Join Date
    Sep 2002
    Location
    Long Island, New York
    Posts
    29

    Dell 964 AIO Printer and Windows 7 [FIXED]

    I have done all that everyone everywhere seems to think would fix this issue.
    My Dell 964 printer will not print after installing W 7 x64.
    I tried compatibility mode to Vista service pack 2, tried unplugging, deleting and reinstalling drivers, it just will not take.
    I am at a loss here and why can't this just be a simple fix??
    Everything else seemed to adapt itself from the upgrade from V x64 to W7 x64.
    Sure a few glitches, but all updated fine.
    Any ideas??

  2. #2
    Junior Member waxace's Avatar
    Join Date
    Sep 2002
    Location
    Long Island, New York
    Posts
    29
    I am posting my own solution as other forums have helped me through this issue.
    Thanks for looking though guys!
    Hopefully this will help someone else someday...

    Well I did finally get a solution to the issue.
    I had to find the 64 bit drivers for the printer for Vista, and then it would install the All in one center and run the printer perfectly.
    Before that I had to download a update from Dell that removed all the Dell crap as to clearly install the drivers and software.
    It is explained if you read the articles and verified answers on Dell's forums
    site here: http://en.community.dell.com/forums/t/19274021.aspx
    The 64 bit working driver for Win 7 is R146813
    I am sure it will work for quite a few Dell Printers

    Thanks folks for all you help as this was driving me nuts!

  3. #3
    Old and Cranky Super Moderator rik's Avatar
    Join Date
    Aug 2003
    Location
    Watching Your every move...
    Posts
    4,638
    Good Catch!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •