Results 1 to 9 of 9

Thread: hal.dll corrupt errors in my rig

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Precision Processor Super Moderator egghead's Avatar
    Join Date
    May 2002
    Location
    In Your Monitor
    Posts
    3,212

    hal.dll corrupt errors in my rig

    Hello!

    I have a p4p8x motherboard,
    http://www.asus.com/products/mb/sock...x/overview.htm

    I have the p4p800 bios installed and it works great!
    http://www.digital-daily.com/motherb...up/index08.htm

    with a cellery 2.4 ghz and 512 dual ddr memory.

    I have simply repair installed WindowsXP to allow myself the opportunity to continue some important work before I do a format and clean install.

    I keep getting a hal.dll corrupt message after a few reboots. (usually after installing service pack 1)

    Do you think my hd is going out to lunch? ( I record lots of HDTV with my sat card)

    Do you think the memory may be bad? its 3200

    The CPU is running at only 400mhz fsb.

    I am going to install a p4 2.6ghz 800ht shortly.

    Do you think windows is just playing with me because of the updated system?

    I updated my os many times before with different systems and this is the first time I am getting this error consistantly.

    Once every day or 2.

    Also sometimes if I keep rebooting it will finally load the os without error.....

    I also saw an error reading from disk message on a couple of boots

    It's an 80gig maxtor thats loaded and smartdrive says it is working fine.

    any suggestions?

    thanks
    egghead
    Last edited by egghead; January 27th, 2004 at 03:34 AM.
    ------------------------------------------------------------



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •