Tried everything :(
Printable View
Tried everything :(
hi lynchknot
techzonez went down for a long time
try this
goto control panel
device manager
delete all your network adapters
you will be using you ethernet for the hookup
open ie/tools/internet options/connections
remove all internet connections that may be their
restart your computer
windows should install your ethernet card
goto network connections and right click local area connections
select properties
make sure tcp/ip is installed
goto
start/run/cmd
type ipconfig/release
type ipconfig/renew
you should be goog to go
lynchknot
could you give me some details in your att manual
1 are you on a proxy?
is your ip config set to automatic?
do you have to register your modem at a special website like adsl?
any info from the manual about windows setup config for att would be helpful
could you give me some details in your att manual
1 are you on a proxy? - I DON'T THINK SO
is your ip config set to automatic? - I BELIEVE SO
do you have to register your modem at a special website like adsl? - AFTER CONNECTION THERE IS AN ACTIVATION GUIDE AND CD. ADSL? - THIS IS CABLE. I THOUGHT DSL IS TELE.
Results: http://lynchk.netfirms.com/screenshots/connect2.JPG
my brother has both and they are setup the same but adsl has to go to a website to register your network cardQuote:
Originally posted by lynchknot
do you have to register your modem at a special website like adsl? - AFTER CONNECTION THERE IS AN ACTIVATION GUIDE AND CD. ADSL? - THIS IS CABLE. I THOUGHT DSL IS TELE.
Results: http://lynchk.netfirms.com/screenshots/connect2.JPG
dsl is telephone and dedicated to your connection
cable is shared with your neighbours
did you try my recommendations?
are you on the same computer to access techzonez now?
i hope this is a second computer
egghead
Yes, I did everything you said - several times - and so did the tech. I only have one computer and a webtv (which I never use anymore - unless the PC is down.)
I'm accessing techzonez with the PC on dial-up. I haven't discontinued MSN yet.
right click local area 5
select properties
tell me what you see
This is what I see:
http://lynchk.netfirms.com/screenshots/1.jpg
great!
uninstall everything that is there
post when you've done that for an update
How can I uninstall everything and get back - doesn't it effect dial-up too? - or do I need to use the webtv? What do you mean? uncheck or uninstall?
these settings should only be for your realtech
i want you to get rid of everything except the tcp/ip
when you've done this check your tcp/ip properties and set everything tp automatic
restart your computer and do run/cmd
type only
ipconfig
you should have a working cable ip
Still nothing but "0"
http://lynchk.netfirms.com/screenshots/ip.JPG
not sure if this was mentioned but you said that you have rebooted plenty of times but have you turned the modem off and back on.
ipconfig/renew
in your local area connection 5
you must only have tcp/ip
everything else must be uninstalled
check your cables
maybe get webtv running so we can dedicate this pc to highspeed
yes, I unplugged the power and plug from the back of both.
ipconfig/renew="the system cannot find the file specified"
everything is uninstalled.