Printable View
iv never setup ms-dos before or win 311, and need help setting up win311 so i can do a upgrade eventually to xp, but i need tyo start at lowset link in windows lol, since my notebook has no os, i have a flopy drive that loads everything it needs, i just need to know what do i add in the editing of config.sys, and auotexec.bat?
im still stuck , been lookin al over the net seems that you need a cdrom to install msdos, or else it wont work, any ideas? can win2k be booted to install from a another computer?
to make your hard drive bootable to msdos
insert msdos bootable floppy
change directory to your floppy
type
sys c:
your boot files will be transfered to your hard drive
the hard drive will now be bootable
if your trying to install win 3,11 just insert the floppy and type setup
okay iv tryed the syscommand, ill retry em thing is all the bootdisks from bootdisk.com have the banna cd rom driver, loading, and thier is no cd drive in the notebook,
Egghead gave you a good procedure. If you are having trouble with the ms-dos disk then try a win (prior to xp) recovery/emergency disk. Once the computer has booted from the recovery disk, use the same command - sys c:. Once the system files are copied to the hard drive, remove the floppy and reboot. It should boot from the HD. Put win3.11 disk 1 in the floppy drive and change to drive a:. Type setup and enter.
If you end up reformating the HD, use the command - format c: /s. This copies the command files to the HD at the conclusion of the format.
thanks efc
one thing to add.
you cannot use partition over 2 gigs with windows 95 and below
if you are using fdisk you will need to say no to enabling the large disk access or windows 95 won't even install.
its ok for windows 98 and above....
Sounds like this could be your prob..
i changed that in partition magic, the drive is fat16 2048 mbs, iv tryed getting win311 on floppy but it takes at least 6 just to get the files,
Egghead,
I don't mean to contradict you (so please correct me if i am wrong) as WIN95 is a long distant memory but wasn't the problem with the 2gig partitions with the early FAT16 WIN95 & not the later FAT32 version? but I guess win 3.11 was FAT16 anyway but I don't know much about 3.11 at aal
S_W if you are going to go up to XP why not just put in a C.D drive now and boot straight off it? Also I know this is only my opinion but I don't like upgrading operating systems I prefer a fresh install so that would solve this issue as well
G
well i would put a new one in only prob is its going to cost over $500 just for the drive, and well i can always covnert the drive to ntfs once it get the system to win 98, right now im trying to get something on thier so i can do a net install, personaly i dont, like upgrading either but at this point i only have 2 options,
Sorry to go on but could you not get a refurbished one we can get them in the UK for about £30 its just that are you going to be able to get drivers for older versions of Windows for your network card?
G
yeah lol i found them on intels web site,
You can pick up an external drive for approx $40.
Don't forget to make sure that the notebook has minimum requirements for xp. I just inherited one for a family member that had been worked on twice and declared dead. The only thing wrong with it was that they had installed win xp on a machine with a 233 MHz processor and 96 MB or RAM. It couldn't even complete the boot process. I formatted and installed Win 98se on it. It is now working great. It will become a "first computer" for one of my grandchildren (two down and six to go).
I am looking for information about the keyboard. Can't figure out what all of the keys do. It is a Compaq Armada 1592. If someone has the book, I would appreciate it if you would scan the pages explaining the keyboard and sending them to me. Google has not helped me find a manual.
Yea EFC,
I do the same when I build a new machine @ work I take the old one home for the kids- better than landfill. But I digress (is that spelt right)? can you set an external drive as a primary boot device?
no bios dont have the option, and efc the notebook is my old server lol. heres specs,
1.Pentuim 4 1.6 ghz
2.768 mb ddr PC2100
3.30 gb hd
4.intel pro ve 10/100
I have never worked on this issue so I had to go Googling for the answer. The best answer found is here.Quote:
Originally Posted by GraemeK
LINK
Well EFC thats just prooves my point that you learn something new every day, thanx, will keep that in mind, although I'm not sure I have ever seen a BIOS that allows you to do that, but then I have never checked I just set it to boot from cd
Regards Graeme
Shadow - GraemeK, There is a lot to digest in this suggestion. It was written for a Sony notebook, however I think it could be use on others.
LINK
well i got WIN311 installed all i need is BB to upload Win95 on floppy to me then i can get things rolling again,
if you had a cable you could use laplink to send data over 2 computers in dosQuote:
Originally Posted by shadow_warez
create a directory called cabs
and copy the win95 or 98 cab files there
simply type setup in the cab directory and win98 will install without difficulties
well thier both connected via a network cable to my router which has the notebooks mac address set in the dchp static ip so its supposed to send a ip to its mac address,