usbehci.sys while installing XP for first time

[egghead]

my windows install problems were related to a dirty xp disc or 1 bad stick of ram
i would get the weirdest errors and setup could not continue due to the corrupt file etc...

i recommend installing xp with a single 128mg stick of ram to test

you can also enter your bios and disable your usb, ethernet and sound if they are built in and that might get you past the install if it is usb related.

good luck

egghead

[Leilani]

Okay, yup, I am getting different types of errors. When I restart, it'll tell me I'm missing some other thing instead. Or it'll just freeze in the middle of loading drivers. The furthest I got was past formatting and then it will be in the middle of copying files and then give me a blue screen of death...but I have to restart and restart the computer until it finally lets me install, but then I can't get past copying files...sigh

Does this sound like a compatibility problem with my hardware?

[egghead]

it sounds like bad memory or worse,

what are your system specs?

is your computer overclocked?

is the computer from a store like hp or dell or is it generic.

[Conan]

Downbload memtest and test your system:

http://www.memtest.org/

Also list your hardware specs; CPU, Motherboard, Video Card, RAM, PSU etc.

[Leilani]

Hmm...

ECS K7S5A Motherboard w/ 1.8 AMD Athlon
80GB Western Digital plus 2nd hard drive 100GB Western Digital
One 512MB Crucial stick
A lite-on 48xCDRW
350W power supply
standard sound card (don't really know)
GeForce2 64MB something

did I forget anything? I tried downloading the memtest, but I'm having a hard time figuring out what to burn it as...I dled the ISO zip file and unzipped it and tried to burn the image, but Roxio gives me options of Floppy emulation, hard disk emulation, or no emulation...something like that...don't understand a thing...

Thanks for the help so far...

[Conan]

Hmm...

ECS K7S5A Motherboard w/ 1.8 AMD Athlon
80GB Western Digital plus 2nd hard drive 100GB Western Digital
One 512MB Crucial stick
A lite-on 48xCDRW
350W power supply
standard sound card (don't really know)
GeForce2 64MB something

did I forget anything? I tried downloading the memtest, but I'm having a hard time figuring out what to burn it as...I dled the ISO zip file and unzipped it and tried to burn the image, but Roxio gives me options of Floppy emulation, hard disk emulation, or no emulation...something like that...don't understand a thing...

Thanks for the help so far...

Do you have a rewritable disk to try it on in case you don't get it right the first time? Personally I use a floppy disk for this, try "no emulation".

[Leilani]

I've tried floppy emulation and no emulation, but maybe I'm just not doing something right...I got a screen when I first put in the floppy emulation disk, but couldn't do anything after that, and then tried the no emulation, but nothing with that either...should I do something or should it automatically run itself? I kinda forgot how this is done...haven't researched enough forums yet to get the right answers...