I dont have those settings in my BIOS. But thanks! Here's what my BIOS does have though:

Current CPU Clock 1150MHz (ouch)
System Performance [ Manual ]
CPU FSB [ 100 ]
CPU Interface [ Normal ]
FSB/DRAM Ratio [ By SPD]
Current Dram Clock 200MHz
Memory Timings [ By SPD]
x T-(RAS) 8
x T-(RCD) 4
x T-(RP) 4
x CAS Latency 2.5
FSB Spread Spectrum [ Disabled ]

Then it goes onto some AGP stuff. The bold values are ones that I can't change with the setup as it is. The x values I can change when I change the Memory timings value.
I think those are the settings I would need to change... Thanks guys!