Results 1 to 15 of 96

Thread: To overclock or not?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. April 2nd, 2005, 02:14 AM #10
    FastGame
    FastGame is offline
    Hardware guy Super Moderator FastGame's Avatar
    Join Date
    Apr 2002
    Location
    Blasters worm farm
    Posts
    3,089
    fg i'm thinking he wants to run the mem at 200
    I just wanted to see if his CPU was really unlocked.

    Yes as Dehcbad25 says, you want higher FSB and running in sync with the CPU. Even if you can only run @333fsb its best that the Nforce2 runs in sync.....better than the CPU @333 and ram @400.

    Lower your multiplier to 11 and raise the FSB some more....

    Set the CPU interface to Aggressive (or enabled) so your ram will run at the 1T command rate.

    Ram timming 2.5-3-3-11

    Download Memtest ISO unzip and burn to CD then boot to the CD after you make bios changes, test the memory

    Memtest Home page
    Last edited by FastGame; April 2nd, 2005 at 02:16 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules