Results 1 to 15 of 96

Thread: To overclock or not?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Platinum+ Member bhxtyrant's Avatar
    Join Date
    Jan 2005
    Posts
    702

    To overclock or not?

    For a long time now i have been thinking about OCing my system a bit.I was recommended by Fastgame to gather my PC specs and post here to get more insight and info on the possible capabilities of my hardware so here we go.

    CPU-AMD Athlon XP 2400+
    Code name-Thoroughbred
    Voltage- 1.648v
    Stepping- 1
    Core speed- 1.997.0 mhz
    Multiplier- x15.0
    FSB- 133.1 mhz
    BUS speed- 266.3 mhz
    L1 data- 64 kbytes
    L1 code- 64 kbytes
    Level2- 256 kbytes

    Cache-
    L1 data cache/L1 instructions cache
    Size-64 kbytes
    assosiativity- 2 way
    Line size- 64 bytes

    L2 cache-
    Location- on chip
    size- 256 kbytes
    assosiativity- 16 way
    Line size- 64 bytes
    Ratio- full
    Frequency- 1997.0 mhz
    bus width- 64 bits
    Prefetch logic- yes

    Motherboard-ASUSTeK
    Model- A7N8X20 REV2.xx
    Chipset- Nvidia Nforce2 Ultra 400 REV-C1
    Southbridge- Nvidia Nforce2 MCP
    Sensor- ASUS ASB100

    BIOS-
    brand- Phoenix Tech
    version- ASUS A7N8X20 ACPI BIOS rev 1007

    General RAM-PC3200
    Type DDR SDRAM
    size- 512MB
    Channel- single

    Timings-
    Frequency- 133.1 mhz
    FSB Dram- 1:1
    CAS# latency- 2.5 clocks
    RAS# to CAS# delay- 3 clocks
    RAS# precharge- 3 clocks
    cycle time- 6 clocks

    As for cooling i dont have anything fancy.I did buy a new heatsink and fan that supports up to AMD Athlon XP 3200+ processors instead of using the default one that comes with the processor.

    The case itself is cooled by 2 80MM fans one front and one rear.

    Thats about it i think.If any more info is needed let me know and thanks in advance.
    Last edited by bhxtyrant; January 31st, 2005 at 13:47 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •