Results 1 to 7 of 7

Thread: Fat32 to NTFS

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Platinum+ Member bhxtyrant's Avatar
    Join Date
    Jan 2005
    Posts
    702
    Hey man,
    I dont know if this will help but i was doing a little reading and found some similar cases to your problem.Now heres the question does your C partition assuming thats the partition your Operating system is installed on have a volume label?For example my C drive has a volume label called "Local Disk" i have used the same method to convert my drive in the past and it worked fine.when you type your command C: /fs:ntfs after it should have you enter the volume label if you have none you just press enter if you do then enter the volume label as seen on the drive then press enter.You should then be prompted to schedule the conversion after a restart since the drive is in use.
    Good luck
    Last edited by bhxtyrant; June 21st, 2007 at 00:42 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •