Network / Internet Problem

[captainron19@ao]

I have tried wiring computer but if I have to reinstall the tcp/ip, how would I do that?

[phishhead]

I have tried wiring computer but if I have to reinstall the tcp/ip, how would I do that?

In Windows XP, a reset command is available in the IP context of the NetShell utility. Follow these steps to use the reset command to reset TCP/IP manually:

1. To open a command prompt, click Start and then click Run. Copy and paste (or type) the following command in the Open box and then press ENTER: cmd
2. At the command prompt, copy and paste (or type) the following command and then press ENTER:netsh int ip reset c:\resetlog.txt
   Note If you do not want to specify a directory path for the log file, use the following command:netsh int ip reset resetlog.txt

When you run the reset command, it rewrites two registry keys that are used by TCP/IP. This has the same result as removing and reinstalling the protocol.