Hey this is cool, I think. No need to go into bios to OC - push up button to OC. I wonder how high I can crank it? Seems to stay at 54c at 1800 so far.
Hey this is cool, I think. No need to go into bios to OC - push up button to OC. I wonder how high I can crank it? Seems to stay at 54c at 1800 so far.
wered you find that nifty little tool?
A Great Sig Done by a Great Artist,
its carp on the KT 333 ultra deluxe it overclocks till it crashes then dfeaults to 100 fsb
A Great Sig Done by a Great Artist,
This thing only works while it's on my desktop - once you exit, it reverts back to the original speed. Now can I OC this without soldering/flipping switches?
Last edited by lynchknot; June 23rd, 2003 at 02:25 AM.
It was on a software CD that came with the mainboard.
You are right - i've got it figured out - it will only OC to 1866 - any higher, my DT will freeze up. Not much of an OC.
Are you using a stock cooler LK? If so you might want to pick up a better cooling solution and that may allow you to overclock it a bit more
I don't know D, but I will send it too you if it will work. BB, temps are only at 54C when it freezes. but then again it's only 46C and it's at 1867 right now. It's cold today.
Last edited by lynchknot; June 24th, 2003 at 18:08 PM.
Are you OC'n by upping the FSB or the multiplier ?
Also your Vcore volts are low @stock 1.58 so go into your bios and change it to 1.65 or 1.75 & see what happens. If that voltage is right then you might have a XP T-Bred B core cuz stock voltage is 1.60volts, the T-Bred A core is 1.65volts
If that XP 2000 is a Palimino core then you won't get much in the way of an OC
Last edited by FastGame; June 25th, 2003 at 04:55 AM.
I'm using that software thing you see in my first post. Does this tell you anything? Is this good or bad?
Bookmarks