Results 1 to 15 of 19

Thread: Help, I'm looping!!!!!

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. March 24th, 2004, 02:39 AM #1
    Big Booger
    Big Booger is offline
    Super Moderator Super Moderator Big Booger's Avatar
    Join Date
    Apr 2002
    Location
    JAPAN
    Posts
    10,201
    Reinstall over the current installation. No files will be lost, only installed programs (just reinstall them)...

    That would be my only suggestion other than reformatting, if you cannot get into the machine to run a fix, or you cannot repair the installation using the ASR.

    Does it give any kind of error message when it reboots? How about in safemode? Where does it hang or stop at.. as when you boot in safe mode it generally shows the DLLs and other files it loads into memory...


    Check the RAM? Could be a bad stick causing the reboot? Could be a PSU problem?

    Have you tried booting to the last known good configuration?
    Last edited by Big Booger; March 24th, 2004 at 02:41 AM.

    Map yourself with TZ Frappr | Booger's Blog
    Reply With Quote Reply With Quote
  2. March 24th, 2004, 03:28 AM #2
    FastGame
    FastGame is offline
    Hardware guy Super Moderator FastGame's Avatar
    Join Date
    Apr 2002
    Location
    Blasters worm farm
    Posts
    3,089
    Hi Sharon

    Check this out http://www.techzonez.com/forums/showthread.php?t=9263

    Download the ISO boot zip and burn it to CD, set first boot device in bios to CD-Rom and test the memory.

    Can you give more detail on the system specs ?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules